What are the transparent LED screens?

As an important branch of display technology, LED transparent screen has been widely used in many fields because of its unique transparency and lightness. According to the classification on the market, transparent LED displays can mainly be divided into the following types:

1. Conventional indoor transparent LED display
   Suitable for indoor environment with light transmittance of more than 80%. Often used in shopping malls, product displays, exhibition halls, museums and other places of advertising display and product display.
2. Conventional outdoor transparent LED display
   Suitable for outdoor environment, light transmittance of more than 70%, good waterproof performance. Often used in commercial streets, squares, sports venues, glass curtain walls and other places of advertising display, information navigation
3. Stage transparent LED screen
   Suitable for indoor and outdoor stage performances, concerts, parties and celebrations. It not only reduces the load-bearing burden on the stage, but also brings endless imagination space to the audience. At the same time, it has the advantages of high refresh rate, high stability and water resistance. It can present a multi-level and three-dimensional stage visual effect by matching various lights, sounds, videos, and various stage equipment and mechanical devices.
4. LED film screen
   The film screen is mounted on an ultra-thin PCB board with a certain hollow-out, and protected by a transparent film and PC. Suitable for atrium fence, chain store, glass curtain wall and other occasions. Its advantages are convenient installation, thin and light products, high permeability, but the disadvantage is that the Angle of view is different, the failure rate is high, the bright color is small, and there is no brand lamp beads.
5. LED soft film screen
   The soft film screen uses a lamp driven lamp bead and is mounted on a transparent conductive film, which is also known as a crystal film screen because it is transparent like crystal. Mainly suitable for indoor occasions, such as atrium fence, glass partition, etc. Its advantages are high permeability, thin and light products, strong sense of science and technology, but the disadvantage is that the Angle of view is small, the failure rate is high, the color is biased, the line is exposed and easy oxidation, and the adhesion is small.
6. LED photoelectric glass screen
   The photoelectric glass screen is the product of sticking the lamp bead of the lamp drive together on the transparent conductive glass. Suitable for indoor glass partition, atrium fence and other occasions. The advantages are high hollowing rate, strong sense of science and technology, and good flatness, but the disadvantages are not seamless splicing, not bending, poor line adhesion, low brightness, and not easy to maintain.
7. Outdoor grille LED screen
   The outdoor LED grille screen is a product that puts a single DIP light strip into an aluminum profile and fills the taillight surface with glue. There are two forms of in-line lamp beads and open-mounted lamp beads. This product is generally used for outdoor applications. For some large-pitch products, the pixel pitch is basically more than 16mm, mainly used for outdoor architectural advertising and lighting projects. The main advantage is the use of conventional components, strong stability, high voltage transmission can be achieved, more convenient customization. The main disadvantage is that if the span is large, it is difficult to ensure its smoothness, it will be bulky after filling the glue, and the input line of the control end will be messy.