Outdoor LED screen installation overview

Today, outdoor LED screens have not only become a beautiful landscape in major cities, but also provide a new display platform for advertisers and promoters. However, the installation of outdoor LED screens is not easy and requires professional technology and rigorous steps. This article will give you a detailed introduction to the installation method and process of outdoor LED screen.

What should we pay attention to before installation of LED outdoor display?
If the LED display is used in the field, it will face many challenges. LED display will be affected by high temperature, cold wave, strong wind, rain and other bad climate, do not do these aspects of the operation, the safe operation of the display will be out of the question.

The installation methods of outdoor LED display are as follows:

1. Embedded installation: Add steel structure on the wall, and then embed outdoor full-color LED display with steel structure as support. It is mainly installed on the exterior wall of the building.
2. Hoisting installation: mainly using the designed steel structure, the outdoor LED display is hung on the structure. Usually on the stage, there is no outdoor wall support, and when the outdoor LED display is temporarily used, the hoisting method has obvious advantages.
3. Step installation: It is mainly installed on the facade of the steps with two-color LED display or full-color screen, high-density LED display and so on. Observation distance is generally less than 3 meters, the effect will be better. When all the step facades are connected to play the video, it will show a very beautiful display effect.
4. Column installation: Because there is no wall around or no available support point, the column installation method has higher requirements for the steel structure, and is the most common installation method. For example, most outdoor advertising screens next to highways use this method.
5. Wall-mounted installation: Generally do the force point on the wall, hang the outdoor LED display on the wall, and use the wall as a fixed support.

The installation steps of outdoor LED screen mainly include the following aspects:

(1) Site investigation: including understanding the geographical location of the site, environmental conditions, human flow and other information, in order to provide a basis for the selection and installation of the display.

(2) Scheme design: including the size, model, brightness, color and other parameters of the display screen, as well as the installation position and Angle of the display screen selection.

(3) Material preparation: including LED screen, control system, power cord, signal cable, fixed parts, etc.

(4) Construction and installation: First of all, install the LED screen in the specified position, and use fixed parts to fix it; Then, connect the control system and power cord to ensure that the display can work normally; Finally, the signal line is connected to connect the display screen to the control system.

(5) Debugging and acceptance: including checking whether the brightness, color and image display of the display screen are normal, and whether the function of the control system is normal. If there is a problem, timely adjustment and treatment.

(6) After-sales service: including regular inspection and maintenance of the display screen to ensure its long-term stable operation. At the same time, technical support and training are provided to help users better use and maintain the display.